#142 / 2015
21 East 96th Street, Brooklyn, New York, NY, United States
The project was completed at the highest client’s satisfaction by supply and installation of duct unit heater, exhaust fans, supply and return grilles, diffusers and louvers; fabrication and installation of ductworks with all associated equipment including fire and volume dampers. All required thermostats with associated wiring were installed by Denair HVAC NYC in accordance of project mechanical specification. We provided air balancing, certified report and shop and as-built drawings.
#139 / 2016
18 Gramercy Park Apartments
18 Gramercy Park South, New York, NY, United States
In this project we furnished and installed new AC units. Denair fabricated rectangular ductworks and installed according to the project specifications with all associated accessories. Air outlets and cable operated dampers were installed.
36 Gramercy Park East Apartments
36 Gramercy Park East, New York, NY, United States
The residential project required installation of new air conditioning units, ductwork with associated accessories, cable operated damper. We provided all necessary mechanical piping, including chilled water S&R piping and condensate piping. Denair installed thermostats, wiring controls and drip pan with leak detector. The drawings, shop and as-built, were provided upon completion.
#99 / 2015
2628 Broadway, New York, NY, United States
This residential project required new ductwork tied into existing unit. We fabricated and installed the duct together with diffusers, grills and dampers, providing all necessary hangers, connectors and transitions. Finally, we performed air balancing providing certified report.
#97 / 2015
303 East 83rd APARTMENTS
303 East 83rd Street, New York, NY, United States
In this residential building we supplied and installed ducted 4-tons split AC unit, providing the required ducts with associated grills and dampers. Furnished and installed refrigerant and condensate piping with condensate pump. We installed all necessary thermostats, detectors and control wiring. To finalize, we carried out system start-up to ensure the system is working at peak performance.
#83 / 2015
Dutch Ambassador’s Residence
1 Beekman Place, New York, NY, United States
At the residence of Dutch Ambassador, Denair HVAC NYC furnished and installed Unit heater, return grills, thermostat and thermostat control wiring. We also installed ductwork fabricated from our end. Mechanical shop drawings and as-built drawing were submitted to the client.
#81 / 2015
148 Waverly Place, New York, NY, United States
Denair HVAC NYC was asked to install 3 indoor ductless AC units as well as 1 outdoor condenser unit. We provided all necessary piping and performed system start-up.
#52 / 2014
36 Gramercy Park East Apartments, Penthouse DE
36 Gramercy Park East, Gramercy Park East, New York, NY, United States
The project was successfully accomplished by installing AC units, exhaust fans, supply and return grills, diffusers and registers. Denair also fabricated and installed ductwork, branches and accessories. Furnished and installed insulation as required by client as well as cable operated dampers. We provided all necessary piping including CWS/CWR and condensate piping. Thermostats and leak detectors were installed as specified. Upon completion Denair performed air test and balancing and provided certified report.
#26 / 2013
36 Gramercy Park East Apartments
36 Gramercy Park East, Gramercy Park East, New York, United States
Furnished and installed AC units, exhaust fans, grills, diffusers and registers. Furnished and installed ductwork, branches & accessories, as well as insulation and operated, back draft and zone dampers. Furnished and installed piping including CHWS/R and condensate. Furnished and installed thermostats and leak detectors. Performed air test and balancing and provided certified report. Shop and as-built drawing have been provided to the client.
2119 East 5th Street, Brooklyn, New York, NY, United States
Furnished and installed ductworks, branches and accessories. Install air handlers, exhaust fans, grills and diffusers. Provided ductwork sketching and mechanical shop drawings.